Berkeley Cars
Berkeley Cars Ltd.
Industry Motor vehicle
Fate bankruptcy
Founded 1956
Defunct 1961
Headquarters Biggleswade, England, UK
Key people Charles Panter, Lawrie Bond
Products T60,T60/4, SE328, SE492, B95, B105
Berkeley Cars Ltd of Biggleswade, Bedfordshire, England produced small economical sporting microcars with motorcycle-derived engines from 322 cc to 692 cc and front wheel drive between 1956 and 1960.
History
The company produced novel sportscar designs by Lawrence "Lawrie" Bond in the Berkeley Coachworks factory owned by Charles Panter, which at the time was one of the largest manufacturers of caravans in Europe.[1] It was an ideal project for Berkeley, who had developed considerable skills in the use of Glass-reinforced plastic[2] (GRP), and were looking for something to fill the gaps in the very seasonal caravan market. What Panter and Bond wanted to achieve was "something good enough to win World 750cc races... but cheap, safe, easily repairable and pretty."[3]
Bond's design capitalised on Berkeley's GRP experience, and consisted of three large mouldings (floor or 'punt', nose, tail) with no conventional chassis. Production began with 3 prototypes, which were seen being tested with enthusiasm around the neighborhood of Biggleswade in the late summer of 1956. Stirling Moss drove one at Goodwood in September, and the public saw the new Berkeley en masse at the 1956 London Motor Show - one year ahead of the Lotus Elite which was also to be of fibreglass monocoque construction.
Unfortunately the caravan market collapsed towards the end of 1960, and Berkeley's slumping sales forced the company into liquidation on 12 December 1960, taking its car manufacturing activities with it. After having produced about 4100 cars of various types, the workforce was laid off shortly before Christmas that year. An attempted sale of the company to Sharp's Commercials Limited (manufacturer of the Bond Minicar) came to nothing,[4] and the last cars were sold in 1961.
The factory was later used by Kayser Bondor Ltd to make women's underwear, but it has now been demolished and the site turned over to housing. A road named 'Berkeley Close' in the housing estate provides the only obvious link to the car factory.
Today there is an active owner's club (the Berkeley Enthusiasts' Club), which provides a range of parts and services aimed at preserving the remaining few hundred cars known to survive worldwide.
Berkeley Car Models
Sports (SA322 and SE328)
Berkeley Sports
Production 1956–1958
1422 approx produced.[5]
Body style 2-door roadster
Engine 322 or 328 cc transverse two stroke twin, air-cooled
Wheelbase 68 in (1,700 mm) [6]
Length 122.5 in (3,110 mm) [6]
Width 50 in (1,300 mm) [6]
Height 43.5 in (1,100 mm) [6]
SA328 fitted with a Honda CB400 super sport engine.
Berkeley's first production car was the 'Sports' (type SA322), announced in September
1956 and produced from October 1956 to January 1957. It was a glass-fibre monocoque,
two-seater open tourer powered by a British Anzani twin-cylinder 322 cc two-stroke
engine producing 15 bhp (11 kW; 15 PS) and mounted transversely driving the front
wheels via a chain and three speed gearbox. The engine was already used by various
small motorcycle manufacturers such as Cotton and Greeves, but in the Berkeley was
fitted with a Siba Dynastart to provide both battery charging and electric starting.
It was a very clever little two stroke engine which incorporated a rotary inlet valve
mechanism in the centre of the crankshaft.
The car had all round independent suspension by coil springs and in spite of the
tiny engine gave remarkably good performance owing to its light weight (kerb weight
700 lb (320 kg)[6]) and excellent roadholding. Girling hydraulic brakes with 7 in
(180 mm) drums were used.
Although usually configured as a two seater with simple bench seat, a hatch could
be removed from behind the front seat revealing a compartment normally containing
the spare wheel and some luggage space which could double as a basic seat for a small
child. Equipment was basic, even the fuel gauge was an extra. This car has often
incorrectly been called the B60 to make it 'fit' with the later model names, but
it was never marketed under that name. The identification plate was a plain stamped
alloy rectangle fitted on the engine bay side wall just above the Dynastart and marked
SA322 B1 etc. (Sports Anzani 322cc Berkeley Chassis number 1). The gearbox was a
three speed type HJR5, and these cars had sloping front edges to the doors so that
when the doors were opened they hinged upwards and closed by themselves.
After 163 of the SA322 cars had been manufactured, a change was made to the SE328
model with a 328 cc Excelsior engine offering 18 bhp (13 kW; 18 PS). The production
run ran from Jan 1957 to April 1958 with chassis numbers from 164 to 1422, many being
exported to the United States. The export model was differentiated by having separate
headlamps whereas on the home market they were faired into the wings, although the
export type lamps could be specified.
Early cars from Jan 1957 to about chassis number 476 in June 1957 still used a column
gear change. During their production run a Deluxe model was offered which was bodily
the same but featured polished wheel trims and spinners, tachometer and twin carburettors.
The chassis plate was similar to the Anzani type on the early cars but was later
changed to a printed type fitted to the bulkhead above the brake master cylinder.
The printed type chassis plate had type ‘SE328’ printed on it. Most of these cars
had the three-speed gearbox similar to the Anzani except for the mounting flanges.
All of the cars had the sloping leading edges to the doors.
The Motor magazine tested a 328 cc Berkeley in 1957 and found it to have a top speed
of 62.1 mph (99.9 km/h) and acceleration from 0-50 mph (80 km/h) in 30.6 seconds.
A fuel consumption of 58.3 miles per imperial gallon (4.85 L/100 km; 48.5 mpg-US)
was recorded. The test car cost £574 on the home market including taxes of £152[6]
(equivalent to £10.3 thousand today).
The SE328 enjoyed considerable success and press exposure through their involvement
with lightweight motor racing, and their famous drivers included Pat Moss who drove
one in the 1958 Liège-Brescia-Liège rally for cars up to 500cc. The Berkeley team
– a works-supported entry of six cars including BBC commentator Robin Richards –
led as far as Slovenia, but slow climbing in summer heat found their weakness and
Pat ended up being towed back to Italy by another Berkeley.
Sports and Twosome (SE492)
Berkeley Sports SE492
1959 Berkeley SE492 Return to Admin Page
Production 1957–1959
666 approx produced.[5]
Body style 2-door roadster
Engine 492 cc transverse two stroke three cylinder, air-cooled
Wheelbase 70 in (1,778.0 mm)[7]
For 1957 the engine was changed to a 30 bhp (22 kW; 30 PS), Excelsior three-cylinder
492 cc with three carburettors. This engine configuration was made possible by the
vertically split crankcase of the Excelsior engine and modular crankshaft and barrels,
which made adding a central cylinder relatively easy. A four speed gearbox was standardised.
The top speed was now 80 mph (130 km/h). The production ran from October 1957 to
March 1959 with chassis numbered 1 to 666. From about October 1958, in order to coincide
with the introduction of the 'Foursome' (see below), they were renamed the ‘Twosome’.
Also at the 1958 Motor Show a Fixed Head (or Hardtop) was announced and displayed
that had internal AND external door handles, but there are no records that this body
style actually reached production.
It is probable that cars pre chassis number 120 (approx), about April 1958, had similar
bodies to the early Berkeley “Sports” cars. Cars from about April 1958 to the end
of production had vertical front door edges and internal door hinges as well, as
body moulding and a few mechanical changes. Early cars were fitted with the four
speed TR gearbox whilst later cars had the larger and stronger VR gearbox.
The cars were successful in Motor Sport and Giovanni Lurani bought three which he
took to Italy, fitted them with his own design of hardtop, and running them in the
750 cc GT class, one driven by Lorenzo Bandini finishing first in the 1958 Monza
12 hour race.
Reliability, always questionable with the aircooled two-strokes, became more of an
issue with the extra heat generated by the triple, and there are many recorded reports
of warranty claims. At one point the US authorities appear to have stopped a shipment
of Berkeleys at the dock pending rectification of what they considered a serious
design issue. There seems little doubt that profitability of the Berkeley programme
was impacted as a result of these claims and the aggressive export drive to markets
not familiar with the eccentricities of British sports motoring.
B95 and B105
Berkeley B95 and B105
1960 Berkeley B95
Production 1959–1961
200 approx produced.[5] Return to Admin Page
Body style 2-door roadster
Engine 692 cc transverse four stroke twin, air-cooled
Wheelbase 70 in (1,778.0 mm)[7]
Length 125 in (3,200 mm)[5]
Width 50 in (1,270.0 mm)[7]
Height 45 in (1,143.0 mm)[7]
The B95 and B105 models were launched at the 1959 Geneva Motor Show and boasted more
power from twin-cylinder Royal Enfield 692 cc four-stroke engines, with the 40 bhp
(30 kW; 41 PS) Super Meteor engine in the B95 and the 50 bhp (37 kW; 51 PS) Constellation
unit in the B105 which could reputedly exceed the magic 100 mph (160 km/h). The engines
featured Berkeley-design primary chain cases to accommodate a Bendix starter motor,
and duplex (or double-row) chain drive to the differential. Kerb weight increased
to 402 kg (890 lb). B95 engine numbers have the unique prefix 'SMTB', while B105
engines are prefixed 'SMUA'.
The prototype car was SE492 chassis number 638, which was modified to add bracing
to withstand the extra power and weight of the four-stroke engine, a taller bonnet
(US hood) with large grille to accommodate the engine, and unfaired headlights. In
mid-February 1959 this car spent two weeks at the Royal Enfield factory, during which
time it covered 500 miles of general road use and 1,000 mi (1,600 km) of endurance
testing at MIRA.
By the time of the press release announcing the launch of the B95 in March 1959,
a further 2,500 mi (4,000 km) of road and track tests had also been carried out by
Berkeley factory drivers. Perhaps to address the reputation for breaking down that
the two-strokes had developed, especially in export markets, it was emphasised by
the factory that during this testing there had been no involuntary stops or any form
of mechanical failure, and that further testing would be performed until a total
of 15,000 mi (24,000 km) had been completed.
At its launch, the B95 cost £659 (equivalent to £11.4 thousand today). About 200
B95 and B105 models were made, with chassis numbers following-on from the SE492 series
and chassis number 670 (the earliest known B95) was registered at the end of March
1959. The first B105, chassis number 686, was delivered about one month later.
About half of the four-stroke cars were exported, and both the B95 and B105
T60 and T60/4 Three Wheelers
Berkeley T60
1960 T60 Three-wheeler
Production 1959–1960
1800 made[5]
Body style 2-door roadster
Engine 328 cc transverse two stroke twin, air-cooled
Length 122.5 in (3,110 mm) [5]
Surprisingly late-on in the British microcar boom of the 1950s, Berkeley's only three-wheeler
model was not introduced until September 1959. It was an instant success in the UK
where three-wheelers could legally be driven on a motorcycle licence, so were suitable
for a motorcyclist with family. Another advantage was that the purchase and road
tax fees for three-wheelers cost considerably less than four-wheeled vehicles. Thus
at its launch, the T60 only cost £400 (equivalent to £6.93 thousand today).
They were fitted with the 328cc Excelsior Talisman engine like the older SE328, and
the four speed and reverse type VR gearbox, and were available as both soft and hardtops.
Chassis numbers run from 1 to approximately 1800, the chassis plate was the printed
SE328 type but with the ‘SE328’ part is often drilled out and T60 stamped in the
chassis number block with the chassis number, the plate was mounted on the bulkhead
above the brake master cylinder.
In their road test of October 1959, The Motor Cycle magazine described the car as
"a fascinating, front-wheel-drive sports car which combines economy with liveliness
and superb cornering."[9]
Drive was still to the front wheels through a four speed gearbox, but a trailing
arm replaced the swing axle independent suspension of the four wheeled cars. The
very last cars had a revised ‘unit’ front and rear suspension layout, presumably
to stop the bridge over the differential from breaking and the rear damper top mount
detaching itself from the car.
The T60/4 was produced from October 1960 and are mechanically and outwardly similar
to the later T60. It was the same length and width as the standard T60, but differed
in having extra room in the back for two seats, the additional space being created
by a revised rear body moulding, thus creating proper seats in the back for two children.
The rear bench seat was fastened to the car and the centre backrest had a bulge in
it because of the revised rear wheel arch. The Car was available in both soft-top
and hardtop forms. These cars used the revised front and rear suspension layouts
used on the very late T60’s.
Both variants of T60 were in production at the time the company was declared insolvent
in December 1960.
B65
Berkeley B65
Production 1960
Less than 20 produced.[5] Return to Admin Page
Body style 2-door roadster
Engine 492 cc transverse two stroke three cylinder, air-cooled
Wheelbase 70 in (1,778.0 mm)[7]
The B65 was announced in September 1960 to compliment the T60, B95 and B105. They
are bodily the same as late SE492 and shared some body panels with the T60, and were
fitted with the 328cc Excelsior engine. Although logically these cars should have
run from chassis number 1422 to 1520, it seems more likely that chassis numbers ranged
from 1500 to 1520. Very few of these cars are known to exist and the ones that do
seem to suggest a production run of about 20 cars or less. All cars had the later
SE492 type bodyshell, complete with the lower front right hand side bulge in the
punt, to accommodate the larger 492cc engine. The type reference marked on the chassis
plate is B65.
Bandit
Berkeley Bandit
1961 Berkeley Bandit
Production 1960
2 made[5]
Body style 2-door roadster
Engine 997 cc longitudinal four stroke four-cylinder, water-cooled
Wheelbase 82 in (2,082.8 mm)[7]
Length 143 in (3,600 mm) [5]
Width 54 in (1,371.6 mm)[7]
Height 44 in (1,117.6 mm)[7]
For 1961 the intention was to move into the mainstream sportscar market with the
Bandit designed by John Tojeiro.[5] This was to be powered by the 997 cc Ford engine
(as in the 105E Anglia) with Berkeley-designed MacPherson strut front and independent
rear suspension. The car had a complex sheet steel chassis, braced by a GRP floor
which was riveted to it, and boasted 8in diameter Girling disc brakes at the front.
This made the design more conventional than earlier models, but still retaining a
distinctive design and relatively light weight. The project did not progress due
to the financial difficulties facing the company at the end of 1960 and fierce competition
from the cheaper Mini and Austin-Healey Sprite, and despite active involvement in
the project from Ford the Bandit failed to survive Berkeley's insolvency. Only two
prototypes were produced; the original Motor Show and press car registration number
700CNM, which has since been restored, and a second prototype car registered YRX292,
which was last seen in Swindon in the late 1960s.
The car was to have sold for £798, equivalent to about £13.2 thousand today.
Return to Admin Page
Return to Admin Page
Return to Admin Page